LED Lighting for Outdoor Signage (Chain Store Age)
A byline article by Steve Williams, president of Harbinger, was published in the online version of Chain Store Age magazine. He explains how retailers can save money through using LEDs in their outdoor signage, whether installing new signs or retrofitting existing signs.
For many years, light-emitting diodes (LED) were primarily known for their use in alarm clocks, flashlights and automobile taillights, but these bulbs offer more benefits than their small size and versatility. LEDs also are highly energy-efficient, and with no filament to burn out, their life spans far exceed those of traditional incandescent or fluorescent bulbs -- lasting 25,000 to 50,000 hours. As a result, they are playing an integral role in the green energy push and are now used by business owners in a variety of ways -- including for lighting in outdoor signage.
Read the full story LED Lighting for Outdoor Signage online.
Retrofitting Program Saves Green
For many years, light-emitting diodes (LED) were primarily known for their use in alarm clocks, flashlights and automobile taillights, but these bulbs offer more benefits than their small size and versatility. LEDs also are highly energy-efficient, and with no filament to burn out, their life spans far exceed those of traditional incandescent or fluorescent bulbs — lasting 25,000 to 50,000 hours. As a result, they are playing an integral role in the green energy push and are now used in a variety of ways — including for lighting in outdoor signage.
While many companies are implementing LED lighting in new or replacement outdoor signs, existing signs can easily be retrofitted with the lights, as well. Retrofitting can be particularly cost-effective for chain stores with multiple locations that may not have the budget or need to replace existing signs. It can take only a few days to replace the lighting, and the new LED lights will immediately lower energy use and decrease maintenance needs. Because LED lights are powered by 12 volts instead of 110 volts, they provide significant reductions in carbon footprint, estimated energy savings between 60 and 80 percent, and an average two-year return on investment. As well, the increased “life span” of LED lights minimizes service frequency and maintenance requirements of signs over the long run.
For businesses wanting to reduce energy costs through a fast and easy retrofitting process, LEDs can be an ideal alternative. Harbinger’s sign-retrofitting program helps customers nationwide achieve cost savings and reduce their environmental impact.
Convenience Store Chain Implements LEDs Nationwide
One of our national convenience store clients is reducing its carbon footprint and environmental impact is by switching to LED lighting. In 2010, Harbinger was retained to retrofit the signage in more than 1,750 locations nationwide – and to do it within the year.
In addition to researching and developing a LED lighting solution, Harbinger fine-tuned its project management process to ensure support of hundreds of retrofits simultaneously in varying stages. On average, Harbinger completes 230 retrofit installs for this client per month. Through Harbinger’s national network of local installers, the project is rolling out state-by-state.
Each retrofit is custom fit per location. The process begins with an on-site survey of the sign cabinet at the store location. Even though the client often has standard-size cabinets, the particular size must be verified. Back at the manufacturing facility, Harbinger cuts the Q Strips, wire and necessary parts to size, adds the LED lights to the strip and connects the power supply. The fully assembled lighting kits are then packaged and shipped out to the installer with precise installation instructions created by Harbinger. The instructions include both written steps and graphic depictions to ensure the on-site retrofit is implemented correctly and efficiently.
Harbinger has completed more than 75 percent of the installs to date, with each install being on time or ahead of schedule. In addition to staying on schedule, our client is pleased to start reducing its energy costs per sign by up to 80 percent with consistently lit brand identification signs.
Lighting the Way (National Petroleum News)
Harbinger was an expert source for a story about lighting solutions for the convenience store and gas station industry in National Petroleum News magazine's August 2010 issue.
In fact, LEDs have been around for more than 40 years, but for a long time they were primarily used in alarm clocks, flashlights and automobile taillights.
“This was in large part because they were previously only available in red—the naturally occurring color of the technology,” said Steve Williams, president of Harbinger. “Now you can purchase them in a variety of colors, and as the technology has advanced, prices have dropped. As a result, usability has dramatically increased, and they are playing an integral role in the green energy push.”
Based on Harbinger's research and experience, they anticipate that the next major technology to take hold in the signage industry will be luminescent plastic. "Luminescent plastic is lit from within, without separate bulbs or wiring. Because signage using this technology would not require a cabinet to house the bulbs, the plastic would provide significant flexibility in sign design," Williams said.
The full story Lighting the Way.